-
Rod electrode or grounding cable for manual metal arc (MMA) welding,
depending on the type of electrode being used
-
Grounding cable for TIG welding
(5)
(-) current socket with bayonet latch
For connecting the:
-
Rod electrode or grounding cable for manual metal arc (MMA) welding,
depending on the type of electrode being used
-
Welding torch in TIG welding (current connection)
(6)
Remote control connection socket
For connecting a remote control
Operating ele-
ments
(3)
(4)
(5)
(1)
(2)
Controls and indicators on the control panel
(1)
"Process" button
For selecting the welding process
-
Manual metal arc welding with HotStart function (recommended for rutile
electrode)
-
Manual metal arc welding with SoftStart function (recommended for basic
electrode)
-
MMA welding with Cel electrode
-
TIG welding
-
TIG pulsed arc welding (TP 2500/3500 TIG only)
IMPORTANT!
The selected welding process remains in memory even after
the mains plug is disconnected.
(2)
Remote control indicator
Lights up when a remote control is connected
(3)
Error indicator
Lights up if the device is too hot
(4)
Welding current adjuster
For continuously adjusting the welding current
(5)
VRD indicator
-
Lights up green when the Voltage Reduction Device (VRD) is active and the
open circuit voltage is less than 35 V
18
