Fronius RC Panel Basic, Operating Instructions Manual

Page: 30 / 124

30
Control elements on the RC Panel Basic, RC Panel
Basic /BT, RC Panel Basic TIG /TMC
General
NOTE!
See the power source Operating Instructions for more details of the welding param-
eters listed below.
Adjuster func-
tions during MIG/
MAG welding
Adjuster func-
tions during elec-
trode welding
The adjuster performs different functions depending on the welding process.
(1) - Setting the welding power
(during MIG/MAG synergic
welding - Standard, Puls,
PMC, LSC)
- Setting the wire feed speed
(during MIG/MAG standard
manual welding)
(2) - Correcting the arc length
(during MIG/MAG synergic welding - Standard, Puls, PMC, LSC)
- = shorter arc length
0 = neutral arc length
+ = longer arc length
- Setting the welding voltage
(during MIG/MAG standard manual welding)
(2) (1)
(1) Setting the welding current
(2) Influencing the arc-force dynam-
ic:
- 0 = soft, low-spatter arc
- 10 = harder, more stable arc
(2) (1)