Fronius IG Public Display, Operating Instructions Manual

Page: 21 / 39

5
EN
Commissioning
General
Public Display
assembly
3
1
1
1
2
660 mm
(25.98 inch)
426 mm (16.77 inch)
Fig. 1 Assembling the Public Display
Warning! Improper use can cause serious injuries to personnel and damage
to equipment. Do not attempt to use the functions until you have read and
understood the following documentation:
-
this Operating Manual
- any operating manuals for system components, especially concerning
safety at work requirements
The Public Display is designed for wall-mounting. As is the case for all DatCom compo-
nents, the unit must be wired in series with the photovoltaic system on the LocalNet.
Important! Attach the Public Display to a firm and flat surface using suitable screws
and plugs. As many surfaces require special plugs and screws, the Public Display is not
supplied with plugs and screws.