Fronius DATCOM Compact, Operating Instructions Manual, Page: 14 / 86

14
The following structured cabling standards must generally be observed:
-
EN 50173-1 for Europe
- ISO/IEC 11801:2002 internationally
- TIA/EIA 568 for North America
Rules for use of copper cables apply.
Preassembled
data cables The following preassembled data cables are available from Fronius:
-
CAT5 cable 1 m ... 43,0004,2435
- CAT5 cable 20 m ... 43,0004,2434
- CAT5 cable 60 m ... 43,0004,2436
The cables listed above are 8-pin, 1:1 LAN network cables, shielded and twisted, including
RJ 45 plugs.
IMPORTANT! Data cables are not UV resistant. They should be protected from sunlight
when laid outdoors.
Fronius Solar Net
client cabling
Termination plugs
Two termination plugs are included in the
scope of delivery of the Fronius Datalogger,
and of each DATCOM component that has
a Datalogger function.
Fronius Solar Net client cabling:
Following the cable connections described below, connect each "OUT" socket of the
previous Fronius Solar Net client to the "IN" socket of the next client.
Connect a termination plug at the "IN" input of the first Solar Net client
Connect a termination plug at the "OUT" output of the last Solar Net client
IMPORTANT! When using the termination plugs, the total individual lengths of all connec-
tion cables must not exceed 1000 m.
NOTE! All "IN" inputs and "OUT" outputs of Fronius Solar Net clients must be
filled either with cable connections or termination plugs.
1
2
3
IN OUT
1
...
IN OUT
2
IN OUT
n
...
...
...
(1) (1)