13
S
EP
1
2
/ Battery Charging Systems /
Welding Technology
/ Solar Electronics
Processes
Functional Tests
Step 1:
Step 1:
Step 1:
Step 1: Press the Parameter Selection button (A⁄ until the
main motor indicator (B⁄ is lit.
Step 2:
Step 2:
Step 2:
Step 2: First test the motor without load by opening up the
drive rolls on the wire feeder
Step 3:
Step 3:
Step 3:
Step 3: Press the Wire Feed button (C⁄ and check the left
most display (D⁄. It should be ~.7 amps (+/- 1
amp⁄.
Step 4:
Step 4:
Step 4:
Step 4: Check the motor under load by closing the drive
rolls on the wire feeder
Step 5:
Step 5:
Step 5:
Step 5: Press the Wire Feed button (C⁄ and check the left
most display (D⁄. It should be ~1.0 amps. (+/-
20%⁄
AAAA
BBBB
C
C
C
C
D
D
D
D
Step 1:
Step 1:
Step 1:
Step 1: Press the Parameter Selection button (A⁄ until the
voltage indicator (B⁄ is lit.
Step 2:
Step 2:
Step 2:
Step 2: Disconnect the ground connection from the front of
the power supply.
Step 3:
Step 3:
Step 3:
Step 3: Press the process select button (C⁄ until the Stick
indicator (D⁄ lights up.
Step 4:
Step 4:
Step 4:
Step 4: The right most display (E⁄ should indicate 40V
within one minute.
Step 5:
Step 5:
Step 5:
Step 5: Press the process select button (C⁄ until the
process changes to something other than TIG or
Stick.
AAAA
BBBB
C
C
C
C
EEEE
Motor Draw Test
Motor Draw Test
Motor Draw Test
Motor Draw Test
Output
Output
Output
Output Voltage
Voltage
Voltage
Voltage Test
Test
Test
Test
D
D
D
D
---- 54
54
54
54 ----
Summary of Contents for CMT-A 4000 MV
