Fronius CMT-A 4000 MV, Operation/Reference Manual

Page: 45 / 92

13
S
EP
1
2
/ Battery Charging Systems / Welding Technology / Solar Electronics
Adjustment Dial Adjustment Dial Adjustment Dial Adjustment Dial
Used to change the
value of a parameter
or setting.
Mode Selection Mode Selection Mode Selection Mode Selection
Buttons ( Buttons ( Buttons ( Buttons (
up/down
⁄⁄⁄⁄
Used to change the
welding process of the
power source.
Trigger Selection Buttons Trigger Selection Buttons Trigger Selection Buttons Trigger Selection Buttons
((((
up/down
⁄⁄⁄⁄
Used to changed the type of trigger
setting for the welding torch.
Material Selection Buttons ( Material Selection Buttons ( Material Selection Buttons ( Material Selection Buttons (
up/down
⁄⁄⁄⁄
Used to select the shielding gas and filler metal to
be used during the welding process.
Diameter Selection Button Diameter Selection Button Diameter Selection Button Diameter Selection Button
Used to select the diameter of the filler metal to be
used during the welding process.
Store Button Store Button Store Button Store Button
Used in conjunction with
other buttons to get into
various other menu s. Can
also be used to exit any
menu.
Purge Button Purge Button Purge Button Purge Button
Used to test the gas flow.
One press will allow gas
flow for 30s, a second
press will stop the flow.
Inch Forward Button Inch Forward Button Inch Forward Button Inch Forward Button
Used to inch the filler wire
forward through the torch
without gas or current flow.
Parameter Selection Button Parameter Selection Button Parameter Selection Button Parameter Selection Button
Used to determine what welding parameter
will be displayed on the SECOND 3-digit
display (arc-length correction, dynamic,
welding voltage, or job number⁄
Parameter Selection Button Parameter Selection Button Parameter Selection Button Parameter Selection Button
Used to determine what welding parameter will be
displayed on the first 3 digit display (sheet thickness,
welding current, wire-feed speed, or drive current⁄.
Keylock Switch (
Keylock Switch ( Keylock Switch (
Keylock Switch ( optional ⁄⁄⁄⁄
Used to lock and unlock the front panel control,
limiting access to who can change welding settings.
---- 42 42 42 42 ----
Use and Operation
Front Panel – Controls (TPS)