Fronius 4,044,008, Operating Instructions Manual

Page: 60 / 136

60
Preparing the torch body coupling for Robacta Drive
and Robacta Drive CMT hosepacks with plastic inner
liners
Preparing the
torch body cou-
pling for Robacta
Drive and Robac-
ta Drive CMT
hosepacks
Insert the inner liner from the original
equipment kit of the hosepack being
used (1) as far as it will go into the torch
body coupling (2) as shown
Insert cutting pipe (3) of the hosepack
being used onto the inner liner
- Cutting pipe item number:
42,0001,5910
Cut off the inner liner (1) at the end of
the cutting pipe (3) using a knife
Remove the cutting pipe (3)
Remove inner liner from the torch body
coupling
Deburr the inner liner at both ends
Insert deburred inner liner (1) as far as
it will go into the torch body coupling
(2)
(3)
(1)
1
2
3
4
5
6
(1)
7