5-12
Pay attention to the mounting position of the eccentric (P32.2034).
Adjustment of the lever P32.1414
If the handle lever after welding and cooling of the strap can be pulled up difficult or not at all, the adjustment
of the lever P32.1414 must be checked.
It can be done as follows:
-
Loose lock nut N1.5120
-
Screw in the socket set screw N1.3150, until it touches the coupler P32.1410
-
Tighten lock nut N1.5120
Test without battery and strap:
-
Press welding lever down until it locks
-
Pull handle lever up
The welding lever must move up before the tension body swings forward.
Swings the tension body forward first, the strap blocks the welding jaw and the handle lever can be pulled up
difficult or not at all.
Afterwards do a test strapping and readjust if necessary.
(P325) Eccentric down
Welding lever
Tension body
P32.1410
N1.3150
N1.5120
P32.1414
Handle lever
