background image

FROMM

 

168230.01EN_Version03 

It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2006

 

 

 

 

  The machines are designed and implemented conforming to the safety laws in force. 

Consequently, no intrinsic fire risks are envisaged when the machine is used normally 

 

  As such, the equipment provided against the possibility of 

fire outbreaks

 inside the company are 

sufficient for any problems caused by the material used for the process 

 

  In the event a fire breaks out and fire extinguishers are used, it is recommended that extinguishers 

filled only with CO2 be used, so as not to damage both the equipment on the machine and the 
wiring system 

 

  In the event of 

flooding

, it is compulsory that all the power supplies be disconnected before 

entering the room in which the machine is installed 

 

  In the event the wrapping machine was subjected to a flooding, contact the Customer technical 

service of MANUFACTURER 

 

  Any attempt to repair or alter the unit can expose the user to the danger of electric shock and it will 

void our warranty. This instrument is covered under warranty provided that 

IT HAS NOT BEEN 

OPENED BY THE USER

 for any reason. If any problem with the unit or system has been 

experienced please notify the manufacturer or the dealer from which the instrument was acquired. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

SAFE

TY INSTRUCTI

O

NS 

Summary of Contents for FS 2 Series
















Reviews: