Troubleshooting
Page 40
B 059 00 08
s
5
5.3
Faults with fault message
If a fault has occurred and has not yet been cleared:
Status LED (1) flashes red
A fault message is shown on the display (2)
An internal distinction is made between 2 types of message:
Warning
Boiler follows shutdown procedure
Error
Boiler shuts down immediately, heating circuit controller
and pumps remain active
5.3.1
Procedure for fault messages
The procedure for a fault message as well as causes for faults and
procedure for troubleshooting are described in the operating instructions
for the boiler controller:
See the operating instructions for the Lambdatronic H 3200
5.3.2
Acknowledging a fault message
Trace and remove the fault and then:
Press the
button
Status LED flashes green
1
2
Summary of Contents for Turbomatic 28 - 55 kW
Page 2: ......
