Froling S3 Turbo 30, Owner'S Manual

Page: 3 / 78

3.2 Back view 34
3.3 Cross-section 35
3.4 Functional description 36
3.5 Permitted fuels 38
3.6 Non-permitted fuels 38
4 Transport, Installation und Initial start-up 39
4.1 Safety 39
4.2 Conditions for initial start-up 39
5 Heating the boiler 40
5.1 Safety instructions for heating 40
5.2 Operation via the boiler controller 41
5.2.1 Control keys and display 41
Navigation keys
41
Status LED
41
Graphic display
42
Function keys
43
5.2.2 Setting parameters 45
5.3 Before heating up the boiler 46
5.3.1 Always move the WOS lever 46
5.3.2 Reloading intervals 46
5.3.3 Conversion tables and right amount of fuel 46
5.3.4 Fuel table 48
5.3.5 Fill level in boiler 48
5.3.6 Reloading intervals when operating without thermal storage or if the thermal storage is too
small
48
5.4 Heating up the boiler 49
5.5 Add more firewood during the operation 53
5.6 Remove ash 55
6 Maintaining the boiler 57
6.1 Safety instructions for maintenance 57
6.2 Securing the system so that it cannot be switched on again 58
6.3 Maintenance schedule 58
6.4 Maintenance work 59
6.4.1 Checking the safety equipment 59
Checking the system pressure
59
Checking the safety valve
59
6.4.2 Remove ash 60
6.4.3 Cleaning the grate 62
6.4.4 Cleaning the flue gas temperature sensor 63
6.4.5 Cleaning the low-temperature carbonization gas duct 63
6.4.6 Cleaning the primary air openings 64
6.4.7 Set and check the seal on the doors 65
Adjusting the doors
67
6.4.8 Cleaning the heat exchanger pipes 68
6.4.9 Cleaning the induced draft fan 70
6.4.10 Disposing of ash 71
6.4.11 After maintenance 72
Table of Contents
Owner´s Manual S3 Turbo | B1390016_en-us 3