Parameters overview | 5
B0640421_en | Operating instructions Control Panel RBG 3200
19
5.2.2 Water - Temperatures
Basic display
Water
Temperatures
Set DHW temperature
When this DHW temperature is reached, DHW tank loading is stopped.
Reload if DHW tank temperature is below
If the DHW tank temperature falls below the value set here, the time window is active and the
loading source (boiler or buffer tank) indicates the set loading increase, and the DHW tank
loading is started.
5.2.3 Water - Times
Basic display
Water
Times
}
14]
5.3 Solar
5.3.1 Solar - Status
Basic display
Solar
State
Collector temperature
Display of the current temperature at the solar collector.
Top storage tank solar sensor
Display of the current temperature at the solar reference sensor in the top part of the buffer
tank.
Solar temperature buffer tank bottom
Display of the current temperature at the solar reference sensor in the lower part of the buffer
tank.
Actual power from solar heat meter [kW]
Display of the current output which is generated by the solar collector. The calculation of the
output is only performed either when a per litre output of the collector pump has been set or an
external volume pulse transmitter is used. In order to perform the calculation more precisely,
the use of a collector return sensor is recommended.
