4 | Operation
14
B0640421_en | Operating instructions Control Panel RBG 3200
4 Operation
4.1 Setting parameters
Unlock parameter
for processing
Navigate to the
desired parameter
Save value and go back
Back without saving
larger
smaller
4.2 Setting times
The desired time window for the component can be set in the "Times" submenu in the
individual menus of the heating components (heating circuits, DHW tanks ...). The
structure of the time menu and the procedure for changing the times are always the
same.
Example - Setting times for heating circuit 01:
In the "Heating" menu -> "Times":
Heating Circuit 01
Heating
Times
Times
Times
Current
program
Change program
Default
program
Current settings for the individual weekdays are displayed.
Pressing the arrow keys changes to the next/previous weekday.
See example below…
The factory-set times are loaded by confirming again (06:00 –
22:00).
Caution - the customer specific time settings are lost in the process!
… In the "Change program" menu:
