28
Wind Sensor
1. Wind cups
(anemometer)
2. Wind vane
2
Installation and Setup
Install outdoor unit
Install batteries
Unscrew the battery door at bottom of unit and insert the batteries according to the +/- polarity indicated.
Screw the battery door compartment on tightly.
NOTE:
- Ensure the water tight O-ring is properly aligned in place to ensure water resistant.
- The red LED will begin flashing every 12 seconds
Assembly the stand and pole
Step 1
Insert the top side of the pole to the square
hole of the weather sensor.
NOTE:
Ensure the pole and sensor's indicator
align.
