38
6 . The console will restart once the update completed.
NOTE:
- Function and WI-FI firmware cannot be updated at the same time, you need to update one by one .
- Please keep connecting the power during the firmware update process.
- Please make sure your PC's WI-FI connection is stable.
- When the update process start, do not operate the PC and console.
- During firmware update the console will stop upload data. It will reconnect to your WI-FI router and
upload the data again once the update success. If the console cannot connect to your router, please end
the SETUP page to setup again.
- After the firmware updates, user might need to input the Weather Underground ID and password again.
6
Other settings & functions of the console
Clock setting
This console is designed to obtain the local time by synchronize with the assigned internet time server. If
you want to use it offline, you can set the time and date manually. During the first time startup, press and
hold the [
WI-FI / SENSOR
] key for 6 seconds and let the console back to normal mode.
1 . In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.
2 . The setting sequence: Time Zone → DST ON/OFF → Hour → Minute → 12/24 hour format → Year
→ Month → Day → M-D/D-M format → Time sync ON/OFF → weekday Language.
3 . Press [ ] or [ ] key to change the value. Press and hold the key for quick-adjust.
4 . Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically exit the
setting mode 60 seconds later without pressing any key.
NOTE
:
- In normal mode, press [ CLOCK SET ] key to switch between year and date display. - During the
setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal model.
Moon phase
The moon phase is determined by the time, date and time zone.
Pointing the outdoor unit to south
The outdoor unit is calibrated to point to North for the maximum accuracy. However, for the user's
convenience (e.g. users in the Southern hemisphere), it is possible to use the sensor with the wind vane
pointing to South.
1 . Install the outdoor unit with its wind meter end pointing to South. (Please refer to INSTALLATION OF
THE WIRELESS SENSOR for mounting details)
2 . In normal mode of the console, press and hold [ INDEX ] key for 10 seconds to enter into the
calibration mode, then press [ INDEX ] key again until the “N” icon appears on the left botton corner of
the LCD to enter into the sensor orientation mode
3 . Use [ Ʌ ] or [ V ] key to change to lower part (Southern Hemisphere).
4 . Press [ INDEX ] key to confirm and exit.
NOTE:
- Changing the hemisphere setting will automatically switch the direction of the moon phase on the
display.