Froggit WH3000SE, Manual

Page: 39 / 89

39
2. Apply power by connecting the AC adapter.
3. Wait for all of the segments to appear on the screen,.
4. Press and hold the WIND/+ and PRESSURE/- keys at the same
time until the console power up sequence is complete (about 5
seconds).
5. Replace the batteries.
6.8.2 Register New Transmitter
Press and hold the LIGHT /SNOOZE button for 5 seconds, and the
console will re-register the wireless sensor.
6.8.3 Backlight Operation
1) With AC adaptor.
The backlight can only be continuously on when the AC adapter is
permanently on. When the AC adapter is disconnected, the backlight
can be temporarily turned on.
Press the LIGHT SNOOZE key to adjust the brightness between High,
Low and Off.
2) Without AC adaptor
To reduce power consumption, the display console will automatically
enter sleep mode and will not send data to the Internet if no key is
pressed for 15s. Hold the
LIGHT /SNOOZE key in sleep mode or plug
in the DC adapter wake up equipment.