16
Invert POOL FROG Pac and
shake slightly until chlorine
tablets fall into tower areas.
POOL FROG Pac is required to assure up to
50% reduction in chlorine use*. POOL FROG
Pac sold separately. (EPA Reg. No. 53735-2)
Using POOL FROG Pac
Cut handle from POOL FROG Pac using a PVC
cutting tool (KEEP OUT OF REACH OF CHILDREN)
.
2.
A.
Find the indent in the
plastic.
B. P
lace curved section of tool
around the narrow end of one
pac tower and line up blade on
indent.
C.
Squeeze the handles
together. Repeat for other
side
D.
Make sure the blade comes
straight across on the indent
line for a clean cut.
E.
If openings are pinched
together, open with fingers
or re-cut closer to the col-
ored screens inside POOL
FROG Pac. Leave at least
1/4” of plastic to fit into
POOL FROG Twin Chlorine
Cycler base.
Finished cut ends
3.
PVC cutting tool
available at local
hardware stores.
®
POOL FROG
Pac
towers
POOL FROG
Pac
towers
A correct oval opening.
Avoid a pinched
opening.
Indent in plastic
®
WARNING
Avoid sparks, smoking, or any open flame near
POOL FROG Twin Cyclers or chemicals.
IMPORTANT:
Read the label on the POOL FROG Pac carefully
before using.
DANGER
Never use fast dissolving chlorine tablets, liquid bleach,
or calcium hypochlorite in the POOL FROG Twin Cyclers.
1.
Turn off pump. Turn
control dial on POOL
FROG Twin Chlorine
Cycler to 0. Remove
cap from the POOL
FROG Twin Chlorine
Cycler and stand back
to let any chlorine
fumes dissipate.
