3. SAMPLE CONNECTION
4. INSTALLATION TIPS
03
How to cut the tubing?
How to connect/disconnect the tubing?
Feed water valve
Outlet tubing
Dedicated faucet
Existing main faucet
Inlet tubing
Hot Cold
Water filter system
Please cut the tubing into two sections in proper length, make sure
cut them squarely and cleanly.
To connect:
Please push the tubing into the fitting and make sure it is
fully inserted. Then put the blue lock clip on the fitting, it
will lock the tubing in place.
Please remove the bule lock clip from the fitting, push in
the lock sleeve, and then pull out the tube from the fitting.
If the tubing is not fully inserted, water leakage may occur.
Pulling out the tubing directly will damage the fitting, which
may also cause water leakage.
To disconnect:
Note:
