Precautions:
Step 1:
Unpack the system and setup the holder for MV99
Model: MV99
Page 3
4.Installation Tips
5.Installation Steps
Make sure every component of the system is connected with
each other firmly.
Use teflon tape if necessary to prevent leakage.
The filter is recommended to be set upright for optimum filtration
performance. The holder of the system is optional for installation.
Please kindly note the package does not include garden hose
and flexible hose protector.
Setup the holder on flat ground.
Insert the long side end of the wire into the upper hole of the holder.
Insert the other end into the base hole.
Make sure all three spring wires of the holder have been streched
out steadily.
1. Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection.
2. Testing was performed under standard laboratory conditions, actual
performance may vary.
3. For cold water use only.
5. Do not allow children under 3 years of age to have access to small
parts during installation.
6. The installation must comply with all applicable state and local
regulations.
4. This filter must be protected from freezing, which can cause cracking
of the filter and water leakage.
1.
2.
3.
4.
Summary of Contents for MV99
Page 1: ...Model MV99 OWNER S MANUAL ...
