20
7425MUM661
Model: CWB FC
- Use and Maintenance Manual
Rev02
ο
EQUA: when the power returns, the machine will work in the same way as
before the power failed;
ο
ON: when the power returns, the machine will start;
ο
OFF: when the power returns, the machine will stay off.
•
To change the type of restart, press
ENTER
and the parameter will be highlight;
•
Use the
UP
and
DOWN
keys to select the desired parameter and confirms
with
ENTER
;
•
To return to the main screen, press
ESC
four times.
5.5 C
HANGING THE SERIAL ADDRESS
(MODBUS
AND
CAN)
If you are installing a serial network with several devices, it may be necessary to change the
serial address of the electronic controller, which is set to 1 at the factory.
•
Starting from the main screen press
ENTER
;
•
Use the
DOWN
key to reach the PAR-Parameters menu, press
ENTER
;
•
From the PAR GEN-General menu press
ENTER
;
•
Use the
DOWN
arrow to reach the GEN SEr-Serial setting menu and press
ENTER
;
•
Use the
DOWN
key to reach the SEr-Cid or Ser-Ser (CAN or MODBUS serial
address respectively): the current serial address is displayed;
•
Press
ENTER
and use the
UP
and
DOWN
arrows to set the desired
value and confirms with
ENTER
;
•
To return to the main screen, press
ESC
four times.
5.6 D
ISPLAY OF INPUTS AND OUTPUTS
It is possible to display the analogue and digital outputs to check the operation of the
machine and its main components.
•
Starting from the main screen press
ENTER
;
•
Use the
DOWN
key to reach the I-O-Input/Output menu, press
ENTER
;
•
From the I-O menu press
ENTER
at I/O Display;
Will appear:
•
Use
DOWN
key to see the second page;
