No Connection with the WLAN Base Station
FRITZ!WLAN Repeater 300E
25
Automatic connection via WPS failed.
Start the connection procedure via WPS again (see
Establishing a Connection Using WPS
WPS is disabled on the WLAN base station.
Install the latest firmware for your WLAN base station and
then enable the WPS function in the base station. Note that
for WPS the radio network name (SSID) of the WLAN base
station must be set to “visible”.
You are attempting to register the FRITZ!WLAN Repeater at
your WLAN base station using WDS (Wireless Distribution
System).
The FRITZ!WLAN Repeater does not support WDS. For
instructions on connecting the FRITZ!WLAN Repeater with
your WLAN base station, see the chapter
FRITZ!WLAN Repeater with a WLAN Base Station
.
The MAC address filter of the WLAN base station is enabled
and the FRITZ!WLAN Repeater is not entered as an exception
in the MAC address list of the WLAN base station.
Enter the MAC address of the FRITZ!WLAN Repeater as an
exception in the MAC address filter of the WLAN base station.
Cause
Help
Cause
Help
Cause
Help
Cause
Help
