11
Buttons and LEDs
FRITZ!DECT Repeater 100 has 2 buttons
with LEDs
Button Function
Status
> Switch on/off LEDs.
DECT
> Deregister from the base
station: Press for at least
6 seconds.
> Register with the base station.
Hold the button down, until the
button fl ashes. Within
2 minutes, start the registration
of a new device with the base
station. For more information,
see page 7.
Each DECT repeater is registered with
the base station. It is not possible to
connect multiple repeaters with each
other directly.
Registering a repeater does
not
re-
duce the number of telephones you
can register with your base station.
LED
Condition
Meaning
Status
disabled
> The LEDs are switched off .
on
> At least one registered cordless telephone has estab-
lished a connection.
fl ashing regularly
> Transmitting fi rmware update to FRITZ!DECT Repeater
100.
DECT
disabled
> The LEDs are switched off .
on
> FRITZ!DECT Repeater 100 is connected with the base
station.
fl ashing regularly
> Registering with the base station.
short fl ash / long
pause
> No connection with the base station.
FRITZ!DECT Repeater 100 is either not registered or
outside the range of the base station.
10