Fritz! Box 7490 Installation And Operation Manual Download Page 175 | Manualshive

Page: 175 / 197

background image

Loading Factory Settings

FRITZ!Box 7490

175

Saving FRITZ!Box Settings

Before loading the factory settings, save all of the settings
you made in your FRITZ!Box to a backup file. With this backup
file you can restore your settings to the FRITZ!Box at any time
or load them to another FRITZ!Box. For more information on
this, see the

Saving and Restoring the FRITZ!Box Settings

section.

Saving Data from Internal Memory

1.

Open the FRITZ!Box user interface, see

.

2.

Select “FRITZ!NAS” in the menu of the FRITZ!Box.

The FRITZ!NAS interface is opened.

3.

Click here with the mouse to select the data you want to
save.

4.

Click the

“Copy FRITZ!NAS to My Device” icon in the

FRITZ!NAS toolbar and confirm by clicking “OK”.

The selected data are copied to a ZIP file in the down-
load order you specified.

This concludes the saving of your data from the internal mem-
ory of the FRITZ!Box.

Loading Factory Settings

1.

In the FRITZ!Box user interface, select the “System /
Backup” menu.

2.

Select the “Factory Settings” tab.

3.

Click the “Load Factory Settings” button.

The FRITZ!Box is reset to its factory settings. All settings made
during operation will be overwritten.

Before loading factory settings, we recommend saving the
settings configured on your FRITZ!Box in a backup file; see

«
...
173
174
175
176
177
...
»

Summary of Contents for Box 7490






































































































































































































Reviews:

No comments

Related manuals for Box 7490

Brand: Paradyne Pages: 2

Brand: Paradyne Pages: 20

Brand: Paradyne Pages: 2

Brand: Zhone Pages: 2

COMSPHERE 6800 Series

Brand: Paradyne Pages: 155

COMSPHERE 6800 Series

Brand: Paradyne Pages: 44

Brand: D-Link Pages: 83

Brand: ZyXEL Communications Pages: 125

BIC 1I12-P2A25-M30MI1-BPX05-110

Brand: Balluff Pages: 12

Brand: 3Com Pages: 50

Brand: Z Microsystems Pages: 51

Brand: WAGO Pages: 48

FlexNetwork 5130 Series

Brand: HPE Pages: 33

Brand: Thecus Pages: 130

Brand: NetComm Pages: 34

Brand: Jensen of Scandinavia Pages: 2

Brand: Camozzi Pages: 22

Brand: IEI Technology Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands