Powe
r/DSL
WLAN
Fon/
DECT
Connec
t/WP
S
Info
Powe
r/DSL
WLAN
Fon/
DECT
Connec
t/WPS
Info
1
2
3
Info
WLAN
Power
Power
WLAN
Info
4
Connecting the FRITZ!WLAN Repeater 1160 with
Wireless LAN at the Touch of a Button
Requirements (Precon
fi
gured in and Ful
fi
lled by a FRITZ!Box)
Wireless access point that supports WPS with the WPA or WPA2 encryption standard
The SSID (name of the wireless radio network) is set to “visible” in the wireless
access point, and the MAC address
fi
lter is disabled for the initial con
fi
guration.
Establishing a Connection to the Computer
1. Insert the FRITZ!WLAN
Repeater 1160 in an outlet in the vicinity of your wireless
access point (for instance, a FRITZ!Box).
2. Press the “WPS” button on the FRITZ!WLAN
Repeater 1160 until the “WLAN” LED
starts to
fl
ash.
3. Within
two
minutes, press the button on your wireless access point that initiates
WPS. For more information, see the documentation of this device.
The FRITZ!WLAN
Repeater 1160 adopts the SSID (radio network name) and the
network key from your wireless access point and establishes a secure wireless
connection. Once the connection has been established,the “Power”, “WLAN” and “ ”
LEDs light up.
4. Insert the FRITZ!WLAN
Repeater in an outlet located about halfway between your
wireless access point and the wireless devices to be added to the wireless network.
The FRITZ!WLAN Repeater 1160 is connected with your home network by wireless LAN.
Check the settings and perform an update if necessary. Continue reading on
page 10
.
Wireless LAN
8
9
