4.
The lock ring with the 6 hexagon screws can now be removed.
5.
Undo the two screws (D) of the battery compartment using a hex-
agon offset screwdriver, size 2.5 mm (7).
6.
Lift off the battery compartment lid and place it to the side. The
battery compartment can be seen.
NOTICE!
Please note that the the battery (2) fits exactly in place
and may need to be pushed in using a certain amount
of force.
The service life of the battery (2) depends on the fre-
quency of the radio protocols (see configuration) and
essentially on the temperature inside the grinding
bowl.
Also pay attention to the battery's charge level. If the
battery's capacity falls below 10%, it should be replaced
immediately.
7.
Remove the old battery and insert the new battery (2). Battery
type: 1.5 V / AA
Pay attention to the polarity when inserting the
battery!
EASY GTM Gas Pressure and Temperature Measuring System
- 8 -
