7 Hexagon offset screwdriver, 2.5 mm
8 GTM support ring
9 Transmission unit
10 Valve insert
11 Lid
12 Bowl
13 Hose clamps
14 Compressed air hose
15 Cleaning rods for valves
16 Valve screwdriver
17 Hexagon screwdriver, 3 mm
2.2 Inserting / changing the battery
Prior to initial start-up, the battery (2) provided must be inserted in the
measuring/transmission unit (9) of the system.
When inserting it for the first time and during subsequent replacement
of the battery, proceed as follows:
1.
Lift off the support ring.
2.
Then release the 6 hexagon screws (C) for closing the system using
a hexagon screwdriver (7). (See
Ä
Chapter 2.9 ‘Cleaning the EASY
GTM system’ on page 14)
3.
Lift the measuring/transmission unit (9) off of the lid (11).
EASY GTM Gas Pressure and Temperature Measuring System
- 7 -
