If a machine part and the corresponding equipment is
replaced or changed, this part has to be checked again in
accordance with EN 60 204‐1. We recommend that you con‐
tact our service team in the event of a fault or malfunction:
Fritsch GmbH
Milling and Sizing
Industriestraße 8
D ‐ 55743 Idar‐Oberstein
Phone: +49 (0)6784/ 70‐0
Fax: +49 (0)6784/ 70‐11
E‐Mail: [email protected]
Internet: http://www.fritsch.de/service/support/
To make it possible to localise the error that has occurred, the LED dis-
play temporarily shows (approx. 5 seconds) a corresponding error code
in the form ‘E nn’ in the first row.
E 00 - 04
If this display appears, there is an error in the machine's electronics. In
this case the machine has to be returned.
NOTICE!
The device should be sent in for a maintenance check in our
factory at least every two years.
Maintenance
- 30 -
