11
Traditional and Chinese fondue: maximum
Cheese or chocolate fondue: start on medium position
Remark: the content may not bubble or boil. In that case, immediately turn the
thermostat lower. Especially cheese and chocolate have to be heated slowly to avoid
boiling over or burning. Stir firmly once in a while to get a smooth mixture. Should you
notice the temperature is not high enough, you can turn up the heat with the
thermostat.
We advise you heat up the fondue while you make all the preparations.
The control lamp is illuminated as long as the desired temperature is not reached. As
soon as the desired temperature is reached the control lamp will be turned off. You
now can fondue.
Remark: during the use of the appliance the control lamp will turn on and off all the
time. This means the thermostat works correctly.
Prick the desired ingredients on the fondue forks and insert them into the fondue pan.
Carefully watch them to make sure they do not burn or do not overcook. Do not
scratch the pan with the fondue forks; this might damage the fondue pan.
As soon as all ingredients are ready, remove them from the pan. After stopping
completely, turn the thermostat as low as possible and remove the plug from the
socket.
CLEANING
First let the appliance cool down completely.
Then pour the oil or the stock. For cheese and chocolate fondue, you’d best first
remove rests of cheese or chocolate with kitchen paper.
In case of persistent rests, let the fondue pan soak with hot soapy water.
You can clean the pan, as well as the forks and the ring in the dishwasher, or by hand.
Do not use abrasive sponges or products.
NEVER
IMMERSE
the appliance, the power cord or the plug in water or any other
liquid.
Clean the outside of the appliance with a damp cloth and dry it with a clean
towel.
USEFUL TIPS IN CASE OF MALFUNCTIONS
Do not use the appliance, when the fondue or the cord is malfunctioning. Then go to your point
of sale.
THE APPLIANCE HAS BEEN DESIGNED FOR DOMESTIC USE. THE GUARANTEE
CONDITIONS EXPIRE UPON PROFESSIONAL USE
DEFECTS AND/OR DAMAGES FOLLOWING TO THE NON OBSERVANCE OF THE USER
MANUAL ARE NOT COVERED BY THE GUARANTEE.
We reserve the right to carry out technical modifications.
GUARANTEE CONDITIONS
Your guarantee starts on the day of purchase. The guarantee lasts 2 years.
Determination of guarantee:
The guarantee covers every repair and/or replacement free of charge of the parts recognized
defective by our Department of Service after Sale if the damage is due to faulty design,
