EN - User Manual K-4227 - 13
Operating instructions
Plug the mains cable of the device into the socket.
Press and hold the ‚
⏻
‘ button for approximately 1 second to switch on
the device. The temperature appears in the LCD display and the device
heats up. The temperature display blinks while the device is heating
up. The display stops blinking when the temperature is reached.
The device has 6 temperature settings from 160 °C to 210 °C. The pre-
set temperature is 180 °C. Repeatedly press the ‚
⏻
‘ button to change
the temperature by 10 °C.
Press and hold the ‚
⏻
‘ button for approximately 1 second to switch of
the device. The temperature will disappear from the LCD display.
The device will switch off automatically if it is not used for 60 minutes.
This is a safety precaution. Nevertheless, always switch off and unplug
the device when it is not being used.
Tips for use
Warning!
The device is not suitable for artifi cial hair or extensions.
Only use on clean, dry hair. Do not use in combination with styling
products such as gel or hair spray.
Recommended temperature:
160 °C – 170 °C
for fi ne and colour-treated hair
180 °C – 190 °C
for normal hair
200 °C – 210 °C
for strong hair
Important!
The hair straightener brush is not a detangling brush. You
should therefore comb your hair well before use so that it is free of
knots. If necessary, use a detangling brush such as the Denman Tangle
Tamer Ultra.
Separate a section of hair to be straightened. Hold the strands fi rmly
by the tips and slowly pull the hair straightener brush from the scalp to
the tips. Repeat this for each section until the desired area is straighte-
