9
Item value:
0 (default):
focus bracketing menu item disabled (set the camera in adapter mode)
1:
focus bracketing menu item enabled (set the camera in native lens mode)
Caution:
1)
When setting focus range and begin position, don’t manually turn focus ring! Always use AF to
drive focus point to the position you want. Or the focus bracketing function may not work properly.
2)
When “FocusBracketing=” is set to 1 in the SETTINGS.INI, the adapter is set to native lens mode
and some functions of the camera may change. Check Table 2 for more details.
3.7.2 Move AF to infinity when powering off/switching to playback mode
Description:
On one hand, lenses with external focus design may not be convenient to be stored in a bag when
its AF isn’t on infinity. Moving AF to infinity automatically when powering off (or switching to
playback mode) is preferred. On the other, one some lenses, the experience of moving AF to/from
infinity every time switching the camera to/from playback mode is not good. To make your own choice,
you may modify SETTINGS.INI as following.
Item name:
PowerOffInfinity
Item value:
0 (default):
Disabled.
1:
Enabled for all lenses.
3.7.3 Force native lens mode for certain lens models to activate in
-
body vignetting
and distortion correction
Description:
By default, these configuration items activate certain lens’ in
-
body vignetting and distortion
correction by setting the camera in native lens mode. See section 3.6 for more details. Users may also
turn it off if they want to manually adjust in mount adapter setting menu.
Item name:
ForceNativeXXXX (XXXX corresponds to the lens currently installed)
Item value:
1 (default):
Force the camera in native lens mode when using this lens
0:
Camera working mode is decided by the value of FocusBracketing.
