- 31 -
v03
3
1
2
Installation options
Foam support
Fig. 1
For use with 20 mm legs only!
When assembling your equipment with the 20 mm
leg, we recommend that you fill the space under-
neath for hygiene reasons. A foam support has been
specially designed for our appliance.
The purpose of this foam support is to fill this restric-
ted space, preventing food waste from getting stuck
between the appliance and the surface on which it
is placed.
It is your responsibility to install this, but only if you
are using the 20 mm legs.
Foam support VCCM 112T
12.01.291
Foam support VCCM 112L
60.73.713
Example of assembly
Fig. 2
Drainage blocking kit
For clients who cannot provide a connection near to
the appliance, one option is to block the internal drai-
nage system. This accessory is not factory assembled,
it must be assembled at the time of installation. A
notice is supplied with the kit.
Drainage blocking kit
60.73.433
Ethernet option
Our appliances can be connected to the local com-
puter network (Ethernet). In technical compartment
A (see p. 9) you will find the corresponding female
connector.
Strip A shown in Fig. 3 supports the female RJ45
connector. The Ethernet cable, equipped with a male
RJ45 connector, should be plugged in here.