4
| Friji Fan Owner’s Manual
8.
Always
turn power off and unplug Friji Fan, and remove water reservoir
before filling, re-filling, emptying, cleaning, changing filter, maintaining in
any way, or moving to a new location.
9. Do not
immerse the appliance in water or other liquid. The fan motor is
not waterproof. Do not get the fan motor wet.
10. Do not
place Friji Fan in or near standing water.
11. Do not
operate Friji Fan if the cord or plug is damaged, the base unit or
fan motor has been immersed in water, dropped, damaged, or in any other
way is not working properly. If this occurs, contact Wind Merchants, LLC at
1-866-456-2814 or [email protected].
Warning—to reduce risk of fire, electric shock, or injury to persons:
12. Do not
use Friji Fan with any solid-state speed control device.
13. Do not
connect to a circuit operating at more than 120 V.
14. Always
use only fuses rated as 250V/3.15A to prevent shock or damage to
the appliance.
15. Always
place Friji Fan and power cord out of reach of children, or persons
with reduced physical, sensory, or mental capabilities, and supervise them
to ensure they do not play with the appliance.
16. Always
place Friji Fan on a firm, flat, dry, stable surface where it will not be
tripped over.
17. Always
keep the power cord away from heated surfaces and out of the
way of foot traffic, where it cannot be stepped on or tripped over.
18. Always
place Friji Fan in an area protected from wind and rain when
using outside.
19. Always
unplug, and empty Friji Fan when not in operation.
Caution—
Be aware that the air stream Friji Fan produces is mist-infused and wet
when first blown from the fan, before the mist has dispersed into the air. The initial
mist can get surfaces wet directly in front of the fan.
To avoid damage or slippery
surfaces, follow all placement instructions.
20. Do not
place Friji Fan directly in front of furniture, walls, or furnishings.
21. Do not
place Friji Fan directly on wood floors or furniture, or other
unprotected surface areas that can be damaged by water. Protect surface
areas by placing on non-metallic waterproof surface.
22. Do not
place Friji Fan where floor areas become slippery when wet.
