Friji Fan Owner’s Manual |
11
Select Comfort Settings.
12.
Select preferred settings by depressing appropriate buttons on the
control panel.
ON/OFF
Press to start or stop Friji.
SPEED
Press to select air speed. The switch toggles between LO (low) and
HI (high). The indicator light shows selected speed.
COMPRESSOR
Press to select a running time of 1, 2, or 3 hours. The indicator
TIMER
light shows time selected. The default setting is 1 hour.
OSC
Press to activate horizontal oscillation. Press again to stop
oscillation.
WATER LEVEL
Top indicator light illuminates when water reservoir needs to
be filled.
Note: If your Friji Fan is not running continuously when you turn it on, be
sure you have removed the magnetic switch, as described in step 2 of the
operation instructions.
If you have removed the magnetic switch but your fan turns off after 30
seconds, unplug, and then plug in again. The electronics will re-set and your
fan will run continuously.
ON/OFF
WATER
LEVEL
SPEED
1
2
3
H
L
COMPRESSOR
TIMER
OSC
