background image

13

STORAGE FEATURES

STORAGE

SpaceWise™ Glass Shelves

Multi-position adjustable slide out glass shelves can be 
moved to any position for larger or smaller packages. The 
shipping spacers that stabilize the shelves for shipping 
may be removed and discarded.

To Adjust The Shelves

•  Lift front edge up.
•  Pull shelf out.
•  Replace the shelf by inserting the hooks at rear of 

the shelf into the wall bracket.  Lower the shelf into 
the desired slots and lock into position.

Deli Drawer

This model is equipped with a Deli

 

Drawer for storage of 

luncheon meats, spreads, cheeses, and other deli items.

Deli Dra

wer Cov

er

Insert Into

Slots

Upper Level Lighting

The upper level lighting comes on automatically when the 
door is opened. 

To replace the light bulbs:

1.  To replace the light bulb, turn the temperature 

control to OFF and unplug the electrical cord. 

2.  Remove the light shield by pushing in on the sides 

where the two tabs are located in the back, then 
rotate the light shield down and out.  

3.  Replace the old bulb with a bulb of the same type 

and wattage. 

4.  When replacing the light shield, insert the three tabs 

in the front of the light shield into the slots in the 
control box and then rotate the rear upward until the 
two retaining latches lock into place.  

IMPORTANT

To disconnect power to the unit, unplug the unit or 
switch the breaker that supplies power to the unit to 
the off position. Replace the old bulb with a bulb of
the same wattage.

Light Shield     

Light Shield Tabs    

Summary of Contents for Professional FPRH19D7LF





















Reviews: