background image

10

Operating Instructions

Operating Instructions

(continued)

2009 Electrolux Home Products, Inc.

All rights reserved.

ADDITIONAL THINGS YOU SHOULD KNOW

Fresh Air Vent Control (on some models)

The Fresh Air Vent allows the air conditioner to:
1.  Recirculate inside air - Vent Closed (see Fig. 1)
2.  Draw fresh air into the room - Fresh Air (see Fig. 2)
3.  Exchange air from the room - Vent Open (see Fig. 3)

Figure 1 (VENT CLOSED)

Figure 2 (FRESH AIR)

Figure 3 (VENT OPEN)

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.

The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. 
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue 
to run during this time.

The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees in cool mode, 55F 
and 80F degrees in heat mode(the upper limit of temperature could reach 86F degrees on some of the 115V models). 

There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY/HEAT. This is to cover the possibility of 
having to roll through to select another mode.

After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.

Air Directional Louvers

Air directional louvers control air flow direction. Your air conditioner has the louver
type described below.

Auger Type

The louvers will allow you to direct the air flow Up or Down and Left or Right 
throughout the room as needed. Rotate the Auger Wheels until the desired 
Left/Right direction is obtained. Pivot horizontal louvers until the desired 
Up/Down direction is obtained.

AUGER WHEELS

(8-WAY)

Summary of Contents for LRA08PZU1














Reviews: