background image

3

TIMER

TIMER

TIMER

TIMER

Setting Kitchen Timer

The 

KITCHEN TIMER

 

Timer

On/O

Off

 pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen

that will beep when the set time has run out.  It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to “Minumum and Maximum Control Pad Settings” for time amount settings.

To set the Kitchen Timer (example: 5 minutes)

1.

Press 

Timer

On/O

Off

"

0:00

" will appear and "

TIMER

" will flash in the

display (Figure 5).

2.

Press the number pads to set the desired time in the display

(example 

5

).  Press 

START

. The time will begin to count down with

"

5:00

" and "

TIMER

" will stay in the display (Figure 6).  Note: If 

START

is not pressed the timer will return to the time of day.

3.

When the set time has run out, "

:00

" and "

TIMER

" will show in the

display (Figure 7). The oven will beep until 

Timer

On/O

Off

 is pressed.

To cancel the Kitchen Timer before the set time has run out

Press 

Timer

On/O

Off

 twice until the clock displays 

"

:

0:00" 

and

 "TIMER"

. The

display will return to the time of day.

Setting the Clock

Setting Continuous Bake or 12 Hour Energy Saving

The 

KITCHEN TIMER

 

Timer

On/O

Off

 and 

CLEAN

 

Clean

 pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is
left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous
Baking.

To set the control for Continuous Bake or 12 Hour
Energy Saving features

1.

Press and hold 

Timer

On/O

Off

 for 7 seconds (Figure 1). After 7 seconds

"

Off 12Hr Off

 will appear in the display (Figure 2).

2.

Press 

Clean

 to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "

On 12Hr On

" (Figure 3) in the

display indicates the control is set for the 12 Hour Energy Saving
mode and 

"Off 12Hr Off"

 indicates the control is set for the

Continuous Bake feature (Figure 2).

3.

Press 

START

 or

 

Clear

/Off

 or wait 5 seconds to accept the change.

(Figure 4; display will return to time of day).

Timer

On/O

Off

 for 7 seconds

Clean

START

or

 

Clear

/Off

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

INSTRUCTIONS

PRESS

DISPLAY

INSTRUCTIONS

PRESS

DISPLAY

Timer

On/O

Off

 

START

Timer

On/O

Off

Summary of Contents for GLEB30T9DS





















Reviews: