8
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(Side Swing Door Models)
Figure 12– SELF CLEAN MODELS ONLY
TYPICAL UNDER COUNTER INSTALLATION OF AN ELECTRIC BUILT-IN OVEN
WITH AN ELECTRIC COOKTOP MOUNTED ABOVE
F
G
Use 3/4" (1.9 cm) plywood, installed
on two runners, flush with toe plate.
Must be capable of supporting 150
pounds (68 kg).
Cut an opening in wood base
minimum 9" x 9", 2" (23 x 23, 5
cm) from left side filler panel, to
route armored cable to junction box
or fuse box.
208/240V junction box for
built-in oven.
To reduce the risk of
personal injury and
tipping the wall oven,
the wall oven must be
secured to the cabinet(s)
by properly installed
mounting screws.
* If no cooktop is installed
directly over the oven unit, 5"
(12.7 cm) maximum is
allowed.
Approx. 3"
(7.6 cm)
36" Min.
(91.4 cm)
4 1/2"
(11.4 cm)
Max.*
Side filler panels are necessary to
isolate the unit from adjoining
cabinets. Panel height should
allow for installation of approved
cooktop models.
Only certain cooktop models may be installed
over certain built-in electric oven models, listed by
the MFG ID number (see the insert sheet included
in the literature package).
H
CUTOUT DIMENSIONS
F. WIDTH
G. DEPTH
H. HEIGHT
27" (68.6 cm)
Wall Oven
24 7/8" (63.2 cm) Min.
25 1/4" (64.1 cm) Max.
23 1/2" (59.7 cm) Min.
28 1/8" (71.4 cm) Min.
28 5/8" (72.7 cm) Max.
Summary of Contents for GLEB27Z7HB - Electric Wall Oven
Page 28: ...2 8 NOTES NOTAS ...