5
1. Carefully raise window to expose filler panel locking
screws. Loosen screws so filler panels slide easily.
2. Extend panels to fill window opening completely.
Tighten locking screws on top.
3. Close window behind top angle.
1. Trim sash seal to fit window width. Insert into space
between upper and lower sashes.
2. Attach right angle safety lock as shown.
7
LOCKING SCREWS
WINDOW SASH SEAL
SAFETY LOCK
3/4' 'long hex-
head screw
8
Extend Window Filler
6
Panels
and Sash Seal
Install Window Lock
Install Chassis into
Cabinet and Install
Front to Unit
3. Be sure chassis is firmly seated towards rear of cabinet.
Installation of front is the reverse of removal outlined
in Section 1.
2.
DO not push on controls OR finned coils.
!
CAUTION
Lift air conditioner and carefully slide into cabinet
leaving 6” protruding.
1.
4.
