Fan mode
Press the “mode” button until the Fan mode indicator lights.
In this mode, you can select fan speed “hi”, “med” or “low”.
In this mode, the
“
í
” or “ + ”
button is disabled and the screen displays the room temperature.
Note: In this mode, the air exhaust hose does not need to be connected.
Dry mode
Press the “mode” button until the Dry mode indicator lights. In this mode, the
“
í
” or “ + ”
button is disabled and the
screen displays the room temperature. The unit will continuously drain moisture from the room.
Note: In this mode, the fan speed will be set as “low” automatically, which cannot be changed.
In this mode, condensate drainage are required, refer to the "Drainage Instructions" on Page 15 for more
instructions to drain the excess condensate.
Operating Instructions
Auto mode
Press the “mode” button until the Auto mode indicator lights.
Press the
“
í
” or “ + ”
button to choose the temperature you want. The screen will display the setting temperature.
In this mode, the unit will automatically select cooling, or fan only operation depending on what temperature you have
selected and the room temperature. The air conditioner will control room temperature automatically round the
temperature point set by you.
Note: In this mode, the unit will run in Auto fan speed and can not be changed.
All rights reserved.
©
(OHRPH3URGXFWV,QF
