background image

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts in a safe place. If

the appliance is to be moved in future

they must be reattached to lock the drum

to prevent internal damage.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Do not install or use the appliance where

the temperature can be less than 0°C or

where it is exposed to the weather.

• The floor area where the appliance is to

be installed must be flat, stable, heat

resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

flooring.

• Do not install the appliance where the

appliance door cannot be fully opened.

• Do not put a container to collect possible

water leakage under the appliance.

Contact the Authorised Service Centre

to ensure which accessories can be

used.

Electrical connection

• The appliance must be earthed.

• Always use a correctly installed

shockproof socket.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the mains cable need to be

replaced, this must be carried out by our

Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• Do not touch the mains cable or the

mains plug with wet hands.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the E.E.C.

Directives.

Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes, pipes

not used for a long time, where repair

work has been carried out or new

devices fitted (water meters, etc.), let the

water flow until it is clean and clear.

• Ensure that there are no visible water

leaks during and after the first use of the

appliance.

Use

 WARNING!

Risk of injury, electrical shock, fire,

burns or damage to the appliance.

• This appliance is for household use only.

• Follow the safety instructions on the

detergent packaging.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

• Make sure that all metal objects are

removed from the laundry.

• Do not touch the glass door while a

programme is in operation. The glass

can get hot.

Disposal

 WARNING!

Risk of injury or suffocation.

4

SAFETY INSTRUCTIONS

Summary of Contents for FWF 71243W





























Reviews: