1. Contact a specialist to install the device.
2. Guarantee that the unit is appropriately fastened and complies with all of
the aforementioned safety norms.
3. Before operating the air conditioner, ensure that the air filter is installed
correctly.
4. If the unit has been out of use for a long period of time, it is recommended
that the air filter be cleaned before use. During continuous use, clean the air
filter every two weeks.
5. This air conditioner was designed for use under the following conditions:
If air conditioner is used outside of the above conditions, certain safety protection
features may come into operation and cause the unit to function abnormally.
Optimum performance will be achieved within these operating temperature.
Preparing the device for operation
Preparing the device for operation
Cool
MODE
Indoor
Indoor
Outdoor
Indoor
Outdoor
Attention
Dehumidifier
Temperature
Temperature
Temperature
Heat*
*
excess of this figure, the surface of the air conditioner may attract condensation.
Room relative humidity should be less than 80%. If the air conditioner operates in
Please set the horizontal louver to its maximum angle (vertically to the floor), and
set HIGH fan mode.
61°F~86°
F
41
°F~1
15
°F 6
1
°F~86°F
6
1
°F~
86
°F
41
°F~1
15
°F
5
°F~
75
°F
only for models with heating function
2
7
Outdoor
