6
INSTALLATION
Toe Grille Must
Fit Over
Anti-tip Bracket
Screw/Washer
Assembly
(3) Retaining Clips
Level Refrigerator & Adjust
Doors
(if necessary)
Guidelines for final positioning of your
refrigerator:
• All four corners of the cabinet must rest
firmly on the floor.
• The sides should tilt ¼ inch (6 mm) from
front to back (to ensure that doors close
and seal properly).
• Doors should align with each other and be
level.
Most of these conditions can be met by
raising or lowering the adjustable front
rollers.
To level the cabinet using the front
rollers:
1 Slightly open freezer drawer. Lift the
toe grille and gently pull forward (see
illustration). Toe grilles vary by model.
2 You can raise or lower each door. Use
a ⅜ inch socket wrench to turn the
adjustment screws (one per side).
To raise: turn adjustment screw clockwise.
To lower: turn adjustment screw
counterclockwise.
3 Ensure both doors are bind-free with their
seals touching the cabinet on all four sides
and that cabinet is stable.
4 After unit is leveled, lower anti-tip leg until
it contacts the floor.
Raise
Lower
Anti-tip
Leg
Door
Door
5 Install the toe grille by fitting into place.
CAUTION
D
o Not loosen or remove these 3 hex
screws.
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
