background image

2

Bill of sale, sales slip, cancelled check or other purchase

record should be kept to verify the original purchase date for

warranty purposes.

©2009 Electrolux Home Products, Inc.

All rights reserved. Printed in the USA

PRODUCT REGISTRATION

Model Number*

Serial Number*
*Above information appears on the label affixed to bottom of

the disposer.  For your convenience, write down the model and

serial numbers prior to installation.

See insert for specific information about your new

disposer:
NOTE:
   This Food Waste Disposer has been designed to

operate on 110-120 Volt, 60Hz exclusively.  Using any other

voltage or Hz adversely affects performance.

IMPORTANT:    Read all instructions thoroughly.  Keep this

guide for future reference.

CAUTION:    Be sure to review SAFETY INSTRUCTIONS

FIRST PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK

OR INJURY TO PERSONS before using disposer.

     Call our toll free Help Line with any questions:

                 

800-944-9044

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.

SAVE THESE INSTRUCTIONS.

Warning:  

When using electrical appliances, basic precaustions should always be followed, including the following:

1.    Read all instructions before using the appliance.

2.    To reduce the risk of injury, close supervision is neces

   sary when an appliance is used near children.

3.     Do not put fingers or hands into a waste disposer.

4.    Turn the power switch to the off position before  at

   tempting to clear a jam or remove an object from the

   disposer.

5.    When attempting to loosen a jam in a waste disposer,

   use a long wooden object such as a wooden spoon or

   the wooden handle of a broom or mop.

6.    When attempting to remove objects from a waste

   disposer use long-handled tongs or pliers.  If the dis

   poser is magnetically actuated, non-magnetic tools

   should be used.

7.   To reduce the risk of injury by materials that may be

  expelled by a waste disposer, do not put the following

  into a disposer: clam or oyster shells; caustic drain

  cleaners or similar products; glass, china or plastic;

  large whole bones; metal, such as bottle caps, tin cans,

  aluminum foil or utensils; hot grease or other hot

  liquids; whole cornhusks.

8.   When not operating a disposer, leave the stopper in

  place to reduce the risks of objects falling onto the

  disposer.

9.   DO NOT operate disposer unless splash guard is in

  place.  (Does not apply to the Top Control/Batch Feed

  units.)

10.  For proper grounding instructions see the ELECTRICAL

  CONNECTION portion of this manual.

Note:  

if you are not familiar iwth electrical power and procedures, call a qualified electrician.

Warning:  

Improper connection of the equipment-grounding conductor can result in a risk of electric shock.  Check

with a qualified electrician or serviceman if you are in doubt  as to whether the appliance is properly grounded.  Do not

modify the plug provided with the appliance if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Summary of Contents for Food Waste Disposer













Reviews: