Frigidaire FNGE90JGRS User Manual Download Page 36

A

Changing from natural gas to

liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

3. Connect the appliance to the electricity.

Changing from liquid gas to

natural gas

1. Unscrew approximately one turn the

bypass screw position A.

2. Put the knob for the oven functions

back.

3. Connect the appliance to the electricity. 

 WARNING!

Put the mains plug into the mains

socket only if all parts are back into

their initial position. There is a risk

of injury.

4. Light the burner.

Refer to "Oven - Daily use" chapter.

5. Turn the knob for the oven functions on

the minimum position.

6. Remove the knob for the oven functions

again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the oven functions

back.

9. Set the maximum gas flow position on

the knob for the oven functions and let

the oven heat for at least 10 minutes.

10. Quickly turn the knob for the oven

functions from maximum to the

minimum gas flow position.

Control the flame. Make sure the flame

does not go out when you turn the knob to

the minimum gas flow position. There must

be a small regular flame on the oven burner

crown. If the flame goes out adjust the oven

burner again.

Gas grill injector replacement

1. Release the screws which keep the grill

burner in position A.

A

2. Release the burner injector with a 7 mm

socket spanner and replace it with a

right one.

3. Assemble the burner in a reverse

sequence. Before you fix the screw,

make sure that the burner is pushed

correctly to the back panel.

Test the grill injectors.

36

INSTALLATION

Summary of Contents for FNGE90JGRS









































Reviews: