background image

19

Operating the oven light

The interior oven light will automatically turn ON when the

oven door is opened.

Press 

 to turn the interior oven light ON and OFF

whenever the oven door is closed.

The interior oven light is located at the upper left rear wall

of the oven interior and is covered with a glass shield held

by a wire holder. The glass shield must be in place

whenever the oven is in use.

To change the interior oven light, see "Changing the oven

light" in the 

Care & Cleaning

 section.

Your appliance has been factory calibrated and tested to

ensure an accurate baking temperature. For the first few

uses, follow your recipe times and temperature

recommendations carefully. If you think the oven is cooking

too hot or too cool for your recipe times, you can adjust the

control so the oven cooks hotter or cooler than the

temperature displayed.

To adjust oven temperature:

1. Press  

.

2. Set the temperature to 550°F (287°C) by pressing and

holding the 

.

3. Within 2 seconds, press and hold 

  until the 2

digit display appears. Release 

.

 

The display now

indicates the amount of degrees offset between the

original factory temperature setting and the current

temperature setting. If the oven control has the original

factory calibration, the display will read "0."

4. The temperature can now be adjusted up or down 35°F

(19°C), in 5°F increments by pressing and holding the

 or 

.  Adjust until the desired amount of offset

appears in the display. When lowering the oven

temperature, a minus sign (-) will appear before the

number to indicate that the oven will be cooler by the

displayed amount of degrees.

5. When you have made the desired adjustment, press

 to go back to the time of day display.

Adjusting the oven temperature

Oven temperature adjustments made will not affect the

broil or self-cleaning feature temperatures.

If the display is set for Celsius, adjustments made will be in

1°C increments each press of the 

 or 

keys.

DO NOT USE

 oven thermometers such as those found in

grocery stores to check the temperature settings inside your

oven. These oven thermometers may vary as much as 20 to

40 degrees from actual temperatures.

NOTES

SETTING OVEN CONTROLS

Summary of Contents for FGGF3031K Service





























Reviews: