background image

21

setting oven controls

SETTING CONTINUOUS BAKE OR 6 HOUR 

energY saving

The 

timer

 and 

selF clean

 pads control the Continuous 

Bake or 6 Hour Energy Saving features. The oven control has 

a factory preset built-in 6 Hour Energy Saving feature that 

will shut off the oven if the oven control is left on for more 

than 6 hours. The oven can be programmed to override this 

feature for Continuous Baking.

To  set  the  control  for  Continuous  Bake  or  6  Hour 
Energy Saving features

1.  Press and hold 

timer 

for 6 seconds. 

 

After 6 seconds “

6Hr oFF

” or “

staY on

” will appear 

in the display and the control will beep once.

2.  Press 

selF clean 

to switch between the 6 Hour Energy 

Saving and continuous bake features. 

Note: “

6Hr oFF

” in the display indicates the control is set for 

the 6 Hour Energy Saving mode and 

“staY on”

 indicates 

the control is set for the Continuous Bake feature.

3.  Press 

start

 to accept the change (display will return to 

time of day) or press 

cancel 

to reject the change.

setting silent control oPeration

The 

delaY  start 

and

  selF  clean 

pads  control  the 

Silent Control operation feature. The Silent Control operation 

feature  allows  the  oven  control  to  be  operated  without 

sounds or beeps whenever necessary. If desired the control 

can be programmed for silent operation and later returned 

to operating with all the normal sounds and beeps.

To change control from normal sound operation to 
silent control operation

1.  To tell if your range is set for normal or silent operation 

press and hold 

delaY start

. “

-- --

” will appear and 

delaY

” will flash in the display.  After 6 seconds “

beeP 

on

” or “

beeP oFF

” will appear in the display.

2.  Press 

selF clean 

to switch between normal sound 

operation and silent operation mode. The display will 

show either “

beeP on

” or “

beeP oFF

”.

Note: If “

beeP on

” appears, the control will operate with 

normal sounds and beeps.  If “

beeP oFF

” appears, 

the control is in the silent operation mode.

3.  Press 

start 

to accept the change or press 

cancel 

to reject the change.

note:

 The control will always beep at the end of a minute 

timer and will beep when a set temperature has been reached, 

even if the control is set to silent operation.

SETTING  TEMPERATURE  DISPLAY  — 
FaHrenHeit or celsius:

The

 BROIL 

and 

selF clean

 pads control the Fahrenheit 

or Celsius temperature display modes. The oven control can 

be programmed to display temperatures in Fahrenheit or 

Celsius. The oven has been preset at the factory to display 

in Fahrenheit.

To  change  display  from  Fahrenheit  to  Celsius  or 
celsius to Fahrenheit

1.  To tell if the display is set for Fahrenheit or Celsius press 

BROIL

 and hold it for 6 seconds; “

550°

” will appear 

and 

“BROIL”

 will flash in the display and a beep will 

sound. If “

Fahrnht

” appears, the display is set to show 

temperatures in Fahrenheit. If “

celsius

” appears, the 

display is set to show temperatures in Celsius.

2.  Press 

selF clean 

to switch between Fahrenheit or 

Celsius  display  modes.  The  display  will  show  either 

Fahrnht

” or “

celsius

”.

3.  Press 

start

 to accept the change or press 

cancel

 

to reject the change.

Summary of Contents for FGES3045KB - 30' Electric Slide-In Range Gallery Mono Group













































Reviews: