manualshive.com logo in svg

Frigidaire FFSC2323TS, Use & Care Manual

Share
Download
Frigidaire FFSC2323TS Use & Care Manual Download Page 7

7

DOOR REMOVAL INSTRUCTIONS

To prepare for removing the doors:

 

1

  Make sure the electrical power cord is 

unplugged from the wall outlet.

 

2

  Open both doors and remove the toe 

grille (as explained in the Installation 

Instructions that came with your 

appliance).

 

3

  Remove any food from the door shelves.

 

4

  Close the doors.

To remove the refrigerator top hinge 

cover:

 

1

  Remove the three screws from each cover 

over the top door hinges.

 

2

  Lift hinge cover straight up and off.

To remove the refrigerator door:

 

1

  Trace lightly around the door’s top hinge 

with a pencil. This makes reinstallation 

easier.

Rear Cover

Screw

Front Cover

Screws

Top

Hinge

Cover

Hinge

Screws

Top

Hinge

Phillips™

Head

Tools Necessary:

Socket 

Wrench Set

Adjustable 

Wrench

3/8" Fixed 

Wrench

Top

Hinge

Screw

Bottom

Hinge

Screw

Top Hinge

Cover Front

Screw

Top Hinge

Cover Rear

Screw

or

or

 

2

  Remove the two screws from the top 

hinge. Lift the door off of the bottom 

hinge and set it aside.

Summary of Contents for FFSC2323TS






























Reviews:

No comments

Brands by name

Popular brands

Load more brands