Frigidaire FFSC2323TS Use & Care Manual Download Page 18

18

IMPORTANT

Small ice cubes or ice chips jamming in the 

ice maker may be a sign that your water 

filter needs changing. If you have a side 

mounted ice maker you may also experience 

hollow cubes partially frozen cubes with 

water inside. When these cubes are 

harvested, they break open and spill water 

over the other ice cubes in the ice container, 

forming a solid mass of ice. As the water 

filter nears the end of its useful life and 

becomes clogged with particles, less water is 

delivered to the ice maker during each cycle. 

The ice maker can’t fill every cube in the ice 

maker mold, leading to small cubes or chips 

that can get caught between the ice ejector 

blades and the stripper. Remember, if your 

ice maker is jamming with small ice cubes or 

it’s been six months or longer since you last 

changed your water filter replace the water 

filter with a new one. Poor quality household 

water may require the filter to be changed 

more frequently.

Ice maker/dispenser tips

•  If your refrigerator is not connected to a 

water supply or the water supply is turned 

off, turn off the ice maker as described in 

the previous section.

•  The following sounds are normal when the 

ice maker is operating:

 

-  Motor running

 

-  Ice dropping into ice bin

 

-  Water valve opening or closing

 

-  Running water

•  When dispensing ice, you will hear a 

snapping or clicking sound when the ice 

chute opens and closes.

• 

If you need a large quantity of ice at one 

time, it is best to get cubes directly from 

the ice bin.

•  Ice cubes stored too long may develop an 

odd flavor. Empty the ice bin as explained 

below.

•  When dispensing cubed ice, it is normal to 

have a small quantity of little pieces along 

with the whole cubes.

•  To avoid splashing, dispense ice into your 

container before adding liquids.

• 

It is normal for ice to fill to the top of the 

ice bin.

IMPORTANT

Your ice maker is turned on at the factory 

so it can work as soon as you install your 

refrigerator. If you cannot connect a water 

supply, set the ice maker’s On/Off feature 

to Off; otherwise, the ice maker’s fill valve 

may make a loud chattering noise when it 

attempts to operate without water.

Using the ice maker after 

installation

Before making ice for the first time, be sure 

to prime the water supply system. Air in new 

plumbing lines can result in two or three empty 

ice maker cycles. Furthermore, if the system 

is not flushed, the first ice cubes may be 

discolored or have an odd flavor.

AUTOMATIC ICE & WATER DISPENSER

CAUTION

If the water supply to your refrigerator is 

softened, be sure the softener is properly 

maintained. Chemicals from a water softener 

can damage the ice maker.

Summary of Contents for FFSC2323TS






























Reviews: