background image

17

NOTE

Leafy vegetables keep best when stored 

with the Humidity Control set on High 

Humidity, or in a drawer without a Humidity 

Control. This keeps incoming air to a 

minimum and maintains maximum moisture 

content. Store non-leafy vegetables and 

fruits still in their skins at the low humidity 

setting.

OPTIONAL FEATURES

Crisper Humidity Control (some 

models)

The crisper humidity control, present on the 

crisper drawers of some models, allows you to 

adjust the humidity within the crisper. This can 

extend the life of fresh vegetables that keep 

best in high humidity.

Low 

Humidity

High 

Humidity

Adjustable door bins

Some models have adjustable door bins that 

can be moved to suit individual needs.
To move door bin along a rail:
 1.  Tilt bin up so the back of the bin is off the 

door but the hook is still engaged.

 2.  Slide bin along rail to desired position.
 3.  Lower bin back into place.
To move door bin from rail to rail:
 1.  Lift bin up disengaging the hook.
 2.  Move bin to desired rail location.
 3.  Push bin hook into rail engaging the hook.

Higher Humidity Lower Humidity

Summary of Contents for FFHT1614Q
























Reviews: