background image

6

Note (some range models only): 

During the self-cleaning, the surface element, when used, are subjected to high heat.

To ensure maximum element life, a safe guard locks off the use of the surface elements during the self-clean cycle. Once
the oven cleaning cycle is completed and the oven door can be opened, the surface elements can be utilized.

To Start the Self-Clean Cycle

*

We recommend a 2 hour self-clean cycle for

 light soils

, and a 3 hour cycle for 

average to heavy soils

 (to assure satisfactory

results).

To Set the Controls for a Self-Clean Cycle:

1. Be sure the clock shows the correct time of day.
2. Push the 

CLEAN 

pad. "- - -" appears in the display.

3. Push the 

UP ARROW

 pad until "3:00" appears in the display for a 3 hour cycle, or push the 

DOWN ARROW

 pad until

"2:00" appears in the display for a 2 hour cycle.

4. As soon as the 

UP 

or 

DOWN ARROW

 pad is released, "CLn" appears in the display.

5. As soon as the controls are set, the motor driven lock will begin to close automatically and the "Door Locked" indicator

light will flash. 

DO NOT

 open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6. The "Door Locked" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1. The time of day or "End" will appear in the display window and the "Clean" and "Door Locked" light will continue to glow.
2. Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened.
3. If "End" is in display and the "Clean" indicator remains on, press 

CLEAR OFF 

pad. The time of day will appear in the display.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire:
1. Push the 

CLEAR OFF

 pad.

2. Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened.
3. Correct the condition which caused the smoking.
4. Restart the self-clean cycle once all conditions have been corrected.

 Use care when opening the oven door after self-cleaning cycle. Stand to the side of the oven when opening the

door to allow hot air or steam to escape.

 

DO NOT

 force the oven door open. This can damage the automatic door locking system. Use caution when

opening the door after the self-cleaning cycle is completed. The oven may still be 

VERY HOT.

Oven Cleaning

Start
time

Bake

time

Timer

On/Off

Clock

Bake

Broil

Clear

/Off

Controls

Clean

Self-Cleaning Oven

Oven

Preheat

Door Locked

Summary of Contents for FEB24S5AQ - E Walloven 24"S/CLN VariBroil

















Reviews: